|
Model
|
EZHD-TVL4
|
EZHD-TVL8
|
EZHD-TVL16
|
|
Intelligent Video Inputs
|
Analog EZHD/SD Inputs
|
4
|
8
|
16
|
|
HD Video Resolutions
|
EZHD / HD-TVI 720p30(25),
720p60(50), 1080p30(25)
|
|
Analog CVBS Video Input
|
Up to 960x480,720x480(NTSC);
960x576,720x576(PAL)
|
|
Adaptive Ports
|
Input Format Auto Detection,
EZHD/SD can be mixed in any combination, at any time
|
|
Interface
|
BNC Connector; 1V p-p, 75Ω
|
|
Privacy masking
|
4 areas programmable in OSD
menu
|
|
Additional OMNI-IP PNP Channels (up to 2 MP)
|
1
|
2
|
|
Total Cameras Supported
|
5
|
10
|
18
|
|
Video Output
|
Main HDMI & VGA
|
Full HD 1920×1080/60Hz; SXGA:
1280×1024/60Hz; 720P: 1280×720/60Hz; XGA: 1024×768/60Hz 1, 2x2, 1+5,
1+7, 3x3, 4x4 split; User Defined Sequence / Alarm Pop-up
|
|
Recording
|
Video Compression
|
Dual Stream: H.264 for Main
Stream and Sub-stream
|
|
Video Bitrate
|
32Kb/s~6Mb/s each channel
|
|
Encoding
|
Main Stream
|
1080p 12FPS; 720p; WD1; 4CIF;
VGA; CIF
|
|
Sub Stream
|
WD1, 4CIF (virtual real
time); CIF; QVGA; QCIF
|
|
Frame Rate
|
Main Stream
|
1/16 fps ~ Real time frame
rate (real time at 720p and lower resolutions)
|
|
Sub Stream
|
1/16 fps ~ Real time frame
rate
|
|
Quality
|
6 levels:
Lowest/Lower/Low/Medium/Higher/Highest
|
|
Mode
|
Continuous; Motion; Alarm;
Motion or alarm, Motion + Alarm
|
|
Motion Detection & VCA
|
Configurable per camera for
area(s), sensitivity and arming schedule programmable by day of week and hour
of day, (One Channel VCA)
|
|
Schedule Period
|
Per day in 1 hour blocks; or
8 time periods per day, each with different record mode; plus holidays
|
|
Pre- and Post- Event Recording
|
Pre-record 0~30 seconds; post
record 5s~10 minutes
|
|
Playback
|
Synchronous Playback
|
4 channels
|
8 channels
|
8 channels
|
|
Playback Resolution
|
1080p, 720p, WD1, 4CIF, VGA,
CIF, QVGA, QCIF
|
|
Search Type
|
Time/Date; Event (Alarm,
Motion, VCA); Manual Tags; Smart Search for motion events from recorded video
|
|
Capacity
|
Up to record rate
|
|
Playback Controls
|
Play; Pause; Forward/Reverse;
speed control for single~1.8~Vmax (256x); Slide bar with overview of record
type and snapshot display from slider position, VCA based accelerated
playback between normal play of VCA events
|
|
Digital Zoom During Playback
|
Supported on Local Displays
and CMS
|
|
Event & Alarm
|
Event Source
|
MD (Motion Detection), Video
Loss, Video Tampering/Exceptions, Video Content Analysis: Line Crossing with
Direction (4-Lines); Area Intrusion (4 Areas) for one BNC Channel
|
|
Event Action Schedule
|
Per day in 1 hour blocks; or
8 time periods per day, each with different record mode; plus holidays
|
|
Event Action
|
Buzzer, E-mail, Alarm Full
Screen Pop-up, Notify CMS Client
|
|
MD Area
|
User selectable grid pattern
22x15 areas with adjustable per camera sensitivity
|
|
System Alarm
|
Alarm Source
|
HDD Error, HDD Full, LAN
Fail/Address Conflict, Illegal login, Video Signal Exception/, Record/Capture
exception
|
|
Alarm Action
|
Buzzer, E-mail, Notify CMS
Client (network permitting)
|
|
Audio
|
Two-way audio
|
Audio input pass through to
remote web or CMS client; remote audio from web or CMS client pass through to
audio output
|
|
Input / Output
|
1ch Input / 1ch Output; RCA,
2V p-p, 1KΩ
|
|
Compression
|
Up to 64Kbps, G.711u
|
|
Network
|
Interface
|
10/100 Base-T Ethernet RJ-45
|
1Gb/s 1000 Base-T Ethernet
RJ-45
|
|
Addressing
|
Static IP, DHCP, xDSL support
|
|
NTP/DST
|
Supported; choice of time
zone, NTP server, DST start/end/offset
|
|
Protocols Supported
|
TCP/IP, PPPoE, DHCP, DNS,
DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS, KT&C Plug-and-Play (for
connected IP Cameras), OMNI Utility Device Discovery
|
|
NAT
|
uPnP router NAT/port mapping
forwards ports automatically (*Router must support/permit uPnP function)
|
|
Users
|
Up to 128 simultaneous
connected users
|
|
DDNS
|
Simple DDNS free service
tracks WAN IP address and HTTP port
|
|
Security
|
User IDs
|
“Admin”, plus multiple
configurable login IDs
|
|
User Levels
|
All rights for “admin”; Per
camera per user rights assignment for Operator and User levels
|
|
User Privilege Control
|
Local and remote access to
Live views, audio, recording, playback, menus, PTZ, alarms, copy, logs,
upgrade, reboot
|
|
Storage & Clip copy
|
HDD Storage
|
1 SATA HDD up to 6Tb
|
2 SATA HDD up to 6Tb each
|
|
NAS/SAN
|
up to 8 network disks (8 NAS
disks, or 7 NAS disks +1 IP SAN disk)
|
|
Copy Type
|
Multi-Channel or Single
Channel File
|
|
Copy Device
|
USB 2.0 Drive (2 ports)
|
|
S.M.A.R.T.
|
Temperature, duration, error
rates, bad sector detection, and more
|
|
Serial & I/O
|
USB 2.0 Ports
|
One front, one rear for mouse
and data I/O
|
|
RS-485
|
One; selectable speed and bit
pattern; multiple protocols (Pelco P, Pelco D, others)
|
|
Up the Cable Control
|
Multiple protocols, can be
sent out of any BNC port to compatible cameras
|
|
User Controls
|
Local Controls
|
Front Panel function and
navigation buttons; IR Remote; Mouse
|
|
Software
|
Web Viewer
|
Live view, playback and
configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension
installed)
|
|
User Rights Control
|
Per user-per camera for
multiple functions
|
|
Mobile Viewer
|
iOS and Android supported ;
live 16 camera views; 4 camera playback; snapshots from live or play; copy
clips/record to smartphone; audio support; PTZ control. HD version of app,
optimized for tablets, displays up to 16 live view cameras
|
|
CMS
|
Free PC and MAC Clients
support multiple device viewing, playback (with digital zoom) and
configuration; user rights per camera; E-map support; live view up to 64
cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
|
|
Event Logging
|
Multiple types: alarm,
exception, operation, information; dozens of sub-types within each major type
|
|
Firmware Upgrade
|
From USB or remotely
|
|
Backup/Restore Configuration
|
From USB or remotely
|
|
General
|
Dimension (W x H x D)
|
12.4” x 9.5” x 1.8” | 315 ×
242 × 45 mm
|
15” x 11.4” x 1.9” | 380 ×
290 × 48mm
|
|
Chassis Type
|
Standalone 1U chassis
|
19” rack-mountable 1U chassis
(Optional rack ears KA-ORM1)
|
|
Weight without HDDs
|
3.3 lb. / 1.5Kg
|
4.4 lb. / 2Kg
|
|
Operating Temp
|
14°F~131°F (-10°C~55°C)
|
|
Operating Humidity
|
10% ~ 90%
|
|
Voltage
|
12VDC from included power
supply, 4 pin DIN; power supply input voltage 100~220 VAC 50~60Hz
|
|
Power
|
Up to 15W
|
Up to 20W
|
Up to 30W
|
|
Certifications
|
FCC, CE, RoHS
|
