Streaming Video Inputs & Recording
|
Maximum Number of IP Cameras
|
16
|
Number of built in PnP/PoE Switch Ports
|
8
|
Supported Live View/ Record Resolutions
|
5MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
|
Sub-stream
|
Supported for recording, playback and live viewing
|
Audio streaming
|
Supported from audio capable cameras
|
Maximum FPS rate per camera
|
30FPS Main stream; 30FPS Sub-stream
|
(Live and Record)
|
Up to 480FPS total for 16 cameras
|
Maximum Record Streaming Video Input Bandwidth (all cameras combined)
|
80 Mb/s
|
Recording Compression
|
Depends on IP Camera; typically H.264 for main stream, MJPEG for sub-stream
|
Recording Modes
|
Continuous, Motion, Alarm, Motion+Alarm, Motion or Alarm
|
Motion Detection
|
Camera Side, configurable from NVR for KNC-p3 Omni IP Series Cameras
|
Schedule Period
|
Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
|
Pre- and Post- Event Recording
|
Pre-record 0~30 seconds; post record 5s~10 minutes
|
Built in network switch port speed
|
10/100 Mb/s each port
|
KT&C Omni-IP 'hands free Plug and Play' Cameras Fully Supported
|
KNC-p3BR4IR, KNC-p3BR6IR, KNC-p3BR12IR, KNC-p3DR4IR, KNC-p3DR3IR,KNC-p3DR6IR, KNC-p3DR12IR, KNC-p3BR4XIR, KNC-p3BR6XIR, KNC-p3BR12XIR, KNC-p3TR4XIR, KNC-p3TR3XIR, KNC-p3TR6XIR, KNC-p3LR4IR, KNC-p3LR3IR, KNC-p3LR6IR, KNC-p3BR28V12IR, KNC-p3DR28V12IR
|
Third Party Cameras Supported (requires traditional configuration and setup)
|
Onvif; Acti, Arecont, Axis, Bosch, Brickcom, Canon, Hikvision, Hunt, Panasonic, Pelco, Samsung, Sanyo, Sony, Vivotek, Zavio
|
Local Live Presentation of Streaming Video/Audio
|
Local Display Main Monitor Outputs HDMI
|
HDMI 60Hz: 1920×1080, 1600×1200, 1280×1024, 1280×720, 1024×768
|
Local Display Main Monitor Outputs VGA
|
VGA 60Hz: 1920×1080P, 1600×1200, 1280×1024, 1280×720, 1024×768
|
Camera Display Layouts
|
1, 2x2, 1+5, 1+7, 3x3, 4x4
|
Automatic Stream Selection
|
Single camera view and 720p 2x2 at main stream resolution; Automatic switching to sub-stream resolution in other multi-view displays to conserve CPU capacity and maintain parity between per-camera screen area and image size
|
Audio Output (requires audio equipped cameras)
|
1-ch Line Level, RCA (Linear, 600Ω)
|
Playback of Recorded Video/Audio
|
Supported Playback Resolutions
|
5MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
|
Local Display Playback Maximum Video Bandwidth (all cameras combined)
|
~8Mb/s nominal
|
Nominal Local Playback Capability
|
8 channels 4CIF; 4 channels 720p; 2 channels 1080p; 1 channel 5Mpix (actual playback depends on decoding load which varies based on settings for recorded video bandwidth restrictions, resolution, image quality, FPS rate, compression efficiency, and complexity of pixel change in the scene)
|
Playback search modes
|
Time/Date; Alarm (motion or other source); Manual Tags; Smart Search for motion events from recorded video
|
Playback Controls
|
Play; Pause; Forward/Reverse; speed control for single~1.8~16X; Slide bar with overview of record type and snapshot display from slider position
|
Digital Zoom During Playback
|
Supported on Local Displays and CMS
|
Local Hard Drives and Other Storage
|
Number of Internal Hard Drives
|
Up to 2 SATA HDD; up to 4TB each for 8TB maximum
|
Mirror Recording
|
Can clone pairs of disks
|
S.M.A.R.T
|
With extensive statistics, alarms, on demand tests and reporting
|
Record to
|
HDD, NAS or SAN
|
Archive to
|
USB, HDD, NAS or SAN
|
Local Plug and Play Camera Network Support
|
Integral PoE Switch
|
8 ports 10/100 Mb/s
|
Camera Network Security
|
Camera network is isolated from LAN/WAN port
|
PoE Type
|
802.3af 15W max per port
|
Total Power Budget
|
100W all ports
|
PnP Network Support
|
Integral DHCP function with address-per-port initial assignment (Using KT&C KNC-p3 Omni-IP Series cameras connected to internal PnP PoE switch ports)
|
Remote Viewing and Local/Remote Configuration
|
Built in Web Server Interface
|
Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
|
CMS
|
PC and MAC Client supports multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
|
Mobile Apps
|
iOS and Android supported ; live 1 & 4 camera views; single camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, is available
|
User Rights Control
|
Per user-per camera for multiple functions
|
Event Logging
|
Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
|
Firmware Upgrade
|
From USB or remotely
|
Backup/Restore Configuration
|
For NVR settings and for IP Camera settings; from USB or remotely
|
Network and Other Interfaces
|
LAN/WAN Network Port
|
One 10/100/1000Mb/s RJ-45 port
|
Connection of non-PnP IP cameras
|
Supported
|
Remote Monitoring Output Maximum Bandwidth
|
40Mb/s
|
Maximum number of remote connections
|
128
|
DST/NTP
|
Supported; choice of time zone, NTP server, DST start/end/offset
|
Port Mapping/uPnP
|
Automatic port forwarding/redirection using uPnP on routers with this capability
|
Serial Interfaces
|
1xRS-485
|
USB 2.0 Interfaces
|
Two: 1 front; 1 rear
|
Audio Input
|
1 RCA
|
General Mechanical and Environmental
|
Power Input
|
100~240VAC, 47~63Hz
|
Continuous Power Consumption
|
145W including PoE
|
Operating Temperature
|
14°F ~ 131°F (-10°C ~ +55°C)
|
Operating Humidity Range
|
10% ~ 90%
|
Cooling Fan
|
1, in power supply
|
Size
|
17.52" x 11.42" x 1.77" (445mm x 290mm x 45mm) Rack Mountable with optional KA-ORM1 brackets
|
Weight (without hard drives or ODD)
|
5.51b (2.5Kg) allow ~1.4 lb. per HDD
|
Certifications
|
FCC, CE, RoHS
|