|
|
|
|
16 Channel HD-TVI DVR
- Intelligent Video Inputs: connect 1080p/720p EZHD HD-TVI or 960H/SD analog to ANY input at any time
- Reuse existing analog cameras or choose any mix of HD/SD on new systems
- Upgrade any analog camera to megapixel at any time
- Superlative HD resolution of 1080p Full HD or 720p HD for amazing image quality
- Useful digital zoom on live view and playback
- Field select 1080p or 720p, 30/25 Hz or 60/50 Hz
- Operation over ‘almost any’ wire
- More than 1000 feet on standard RG59 coax
- More than 1500 feet on RG6
- More than 500 feet on UTP (one pair from a Cat5e cable, using optional KA-HDBAL1 balun pair)
- Display Live/Record 2.1 Megapixel 1920x1080 (1080p), 1 Megapixel 1280x960 (720p), 960x480 (WD1/960H), 704x480 (SD)
- Real time recording on any/all channels at 1080p, 720p, WD1 or SD resolution
- Playback any/all cameras at up to real time record rate
- Independent configuration for each channel: resolution main/sub-stream, FPS, bit rate, image quality, etc.
- Up-the-cable control [UTC] to access compatible camera OSD menus from the DVR PTZ controls (local or remotely)
- Triple Technology Recording: Connect 2 additional OMNI-IP Plug-and-Play IP cameras (4+2, 8+2, 16+2) up to 1080p resolution without sacrificing BNC inputs
- H.264 Compression for efficient HDD utilization
- Four internal hard drives for up to 16Tb of internal storage, plus eSATA port; HDD redundancy option
- Up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
- Simultaneous high bandwidth recording plus sub-stream recording for reduced bandwidth remote viewing
- Watermarking for validation of recorded video
- Record scheduling per-camera, with HDD quotas, holidays, parameter change on alarm/event
- Unique Channel 0 remote stream displays user defined multi-view in the bandwidth of a single channel
- Pentaplex Operation (Simultaneous live, recording, playback, archiving and remote viewing)
- Easy router setup for remote access: uPnP/NAT automatically sets up port forwarding (router must support/allow uPnP)
- HDMI/VGA and CVBS monitor outputs for up to 1080p HD display detail; use either for main or spot/call functions
- User friendly GUI with graphical icons, visual indicators and multiple language support
- Easy to use on-screen menus include digital zoom and instant playback of recent video
- Operate using front panel controls, wheel mouse or included IR remote
- Quickly locate and review event video
- Search by date/time, or preview images by pointing along a color coded timeline of record type
- Tag video of interest for easy retrieval or export
- Play based on results of extensive event/alarm log search
- Use “Smart Search” to define an area of interest; the DVR quickly reviews recorded video to list instances of motion in that area for review by the operator
- Digital Zoom with Virtual PTZ in Live & Playback
- Privacy masking (4 zones) to block observation of specific areas within the field of view
- Audio Inputs (5) and Outputs (2) for recording and/or two way audio
- Alarm inputs (16) and outputs (4) to interface with local hardware
- Ethernet interface for remote network viewing and control, and to connect IP cameras
- Multiple Control Inputs: local mouse/hand held IR remote controller (both included); web browser and CMS controls
- On-screen PTZ control via mouse or IR remote
- USB 2.0 ports on front and one on rear panel for video archive and mouse usage
- Free DDNS Service – static IP address is not required for reliable remote access
- IE, Chrome, Firefox and Safari browser Web clients
- Free Multi-Site Windows and MAC OMNI CMS can display up to 64 live/16 playback views
- Remote configuration support from built-in web interface and/or free OMNI CMS program
- Free iOS and Android apps:
- Scroll though single/quad display live views
- Playback specific cameras by date/time plus easy slider control
- Audio monitoring support
- PTZ and relay control
- Up to 16 camera views from HD tablets (HD app)
Downloads
Model |
EZHD-TVL4 |
EZHD-TVL8 |
EZHD-TVL16 |
Intelligent Video Inputs |
Analog EZHD/SD Inputs |
4 |
8 |
16 |
HD Video Resolutions |
EZHD / HD-TVI 720p30(25), 720p60(50), 1080p30(25) |
Analog CVBS Video Input |
Up to 960x480,720x480(NTSC); 960x576,720x576(PAL) |
Adaptive Ports |
Input Format Auto Detection, EZHD/SD can be mixed in any combination, at any time |
Interface |
BNC Connector; 1V p-p, 75Ω |
Privacy masking |
4 areas programmable in OSD menu |
Additional OMNI-IP PNP Channels (up to 2 MP) |
1 |
2 |
Total Cameras Supported |
5 |
10 |
18 |
Video Output |
Main HDMI & VGA |
Full HD 1920×1080/60Hz; SXGA: 1280×1024/60Hz; 720P: 1280×720/60Hz; XGA: 1024×768/60Hz 1, 2x2, 1+5, 1+7, 3x3, 4x4 split; User Defined Sequence / Alarm Pop-up |
Recording |
Video Compression |
Dual Stream: H.264 for Main Stream and Sub-stream |
Video Bitrate |
32Kb/s~6Mb/s each channel |
Encoding |
Main Stream |
1080p (virtual real time); 720p; WD1; 4CIF; VGA; CIF |
Sub Stream |
WD1, 4CIF (virtual real time); CIF; QVGA; QCIF |
Frame Rate |
Main Stream |
1/16 fps ~ Real time frame rate (real time at 720p and lower resolutions) |
Sub Stream |
1/16 fps ~ Real time frame rate |
Quality |
6 levels: Lowest/Lower/Low/Medium/Higher/Highest |
Mode |
Continuous; Motion; Alarm; Motion or alarm, Motion + Alarm |
Motion Detection |
Configurable per camera for area(s), sensitivity and arming schedule programmable by day of week and hour of day |
Schedule Period |
Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays |
Pre- and Post- Event Recording |
Pre-record 0~30 seconds; post record 5s~10 minutes |
Playback |
Synchronous Playback |
4 channels |
8 channels |
16 channels |
Playback Resolution |
1080p, 720p, WD1, 4CIF, VGA, CIF, QVGA, QCIF |
Search Type |
Time/Date; motion or log event; Manual Tags; Smart Search for motion events from recorded video |
Capacity |
Up to record rate |
Playback Controls |
Play; Pause; Forward/Reverse; speed control for single~1.8~16X; Slide bar with overview of record type and snapshot display from slider position |
Digital Zoom During Playback |
Supported on Local Displays and CMS |
Event & Alarm |
Event Source |
MD (Motion Detection), Video Loss, Video Tampering/Exceptions |
Event Action Schedule |
Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays |
Event Action |
Buzzer, E-mail, Alarm Full Screen Pop-up, Notify CMS Client |
MD Area |
User selectable grid pattern 22x15 areas with adjustable per camera sensitivity |
System Alarm |
Alarm Source |
HDD Error, HDD Full, LAN Fail/Address Conflict, Illegal login, Video Signal Exception/, Record/Capture exception |
Alarm Action |
Buzzer, E-mail, Notify CMS Client (network permitting) |
Audio |
Two-way audio |
Audio input pass through to remote web or CMS client; remote audio from web or CMS client pass through to audio output |
Input / Output |
1ch Input / 1ch Output; RCA, 2V p-p, 1KΩ |
Compression |
Up to 64Kbps, G.711u |
Network |
Interface |
10/100 Base-T Ethernet RJ-45 |
1Gb/s 1000 Base-T Ethernet RJ-45 |
Addressing |
Static IP, DHCP, xDSL support |
NTP/DST |
Supported; choice of time zone, NTP server, DST start/end/offset |
Protocols Supported |
TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS, KT&C Plug-and-Play (for connected IP Cameras), OMNI Utility Device Discovery |
NAT |
uPnP router NAT/port mapping forwards ports automatically (*Router must support/permit uPnP function) |
Users |
Up to 128 simultaneous connected users |
DDNS |
Simple DDNS free service tracks WAN IP address and HTTP port |
Security |
User IDs |
“Admin”, plus multiple configurable login IDs |
User Levels |
All rights for “admin”; Per camera per user rights assignment for Operator and User levels |
User Privilege Control |
Local and remote access to Live views, audio, recording, playback, menus, PTZ, alarms, copy, logs, upgrade, reboot |
Storage & Clip copy |
HDD Storage |
1 SATA HDD up to 4Tb |
2 SATA HDD up to 4Tb each |
NAS/SAN |
up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk) |
Copy Type |
Multi-Channel or Single Channel File |
Copy Device |
USB 2.0 Drive (2 ports) |
S.M.A.R.T. |
Temperature, duration, error rates, bad sector detection, and more |
Serial & I/O |
USB 2.0 Ports |
One front, one rear for mouse and data I/O |
RS-485 |
One; selectable speed and bit pattern; multiple protocols (Pelco P, Pelco D, others) |
Up the Cable Control |
Multiple protocols, can be sent out of any BNC port to compatible cameras |
User Controls |
Local Controls |
Front Panel camera, function and navigation buttons; IR Remote; Mouse |
Software |
Web Viewer |
Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed) |
User Rights Control |
Per user-per camera for multiple functions |
Mobile Viewer |
iOS and Android supported ; live 1 & 4 camera views; single camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, displays up to 16 live view cameras |
CMS |
Free PC and MAC Clients support multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback |
Event Logging |
Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type |
Firmware Upgrade |
From USB or remotely |
Backup/Restore Configuration |
From USB or remotely |
General |
Dimension (W x H x D) |
12.4” x 9.5” x 1.8” | 315 × 242 × 45 mm |
15” x 11.4” x 1.9” | 380 × 290 × 48mm |
Chassis Type |
Standalone 1U chassis |
19” rack-mountable 1U chassis (Optional rack ears KA-ORM1) |
Weight without HDDs |
3.3 lb. / 1.5Kg |
4.4 lb. / 2Kg |
Operating Temp |
14°F~131°F (-10°C~55°C) |
Operating Humidity |
10% ~ 90% |
Voltage |
12VDC from included power supply, 4 pin DIN; power supply input voltage 100~220 VAC 50~60Hz |
Power |
Up to 15W |
Up to 20W |
Up to 30W |
Certifications |
FCC, CE, RoHS |
|
|
|
|
|
|
|
|
|