 |
 |
 |
|
4 Channel HD-TVI DVR
- Intelligent Video Inputs: connect 1080p/720p EZHD HD-TVI or 960H/SD analog to ANY input at any time
- Reuse existing analog cameras or choose any mix of HD/SD on new systems
- Upgrade any analog camera to megapixel at any time
- Superlative HD resolution of 1080p Full HD or 720p HD for amazing image quality
- Useful digital zoom on live view and playback
- Field select 1080p or 720p, 30/25 Hz or 60/50 Hz
- Operation over ‘almost any’ wire
- More than 1000 feet on standard RG59 coax
- More than 1500 feet on RG6
- More than 500 feet on UTP (one pair from a Cat5e cable, using optional KA-HDBAL1 balun pair)
- Display Live/Record 2.1 Megapixel 1920x1080 (1080p), 1 Megapixel 1280x960 (720p), 960x480 (WD1/960H), 704x480 (SD)
- Real time recording on any/all channels at 1080p, 720p, WD1 or SD resolution
- Playback any/all cameras at up to real time record rate
- Independent configuration for each channel: resolution main/sub-stream, FPS, bit rate, image quality, etc.
- Up-the-cable control [UTC] to access compatible camera OSD menus from the DVR PTZ controls (local or remotely)
- Triple Technology Recording: Connect 2 additional OMNI-IP Plug-and-Play IP cameras (4+2, 8+2, 16+2) up to 1080p resolution without sacrificing BNC inputs
- H.264 Compression for efficient HDD utilization
- Four internal hard drives for up to 16Tb of internal storage, plus eSATA port; HDD redundancy option
- Up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
- Simultaneous high bandwidth recording plus sub-stream recording for reduced bandwidth remote viewing
- Watermarking for validation of recorded video
- Record scheduling per-camera, with HDD quotas, holidays, parameter change on alarm/event
- Unique Channel 0 remote stream displays user defined multi-view in the bandwidth of a single channel
- Pentaplex Operation (Simultaneous live, recording, playback, archiving and remote viewing)
- Easy router setup for remote access: uPnP/NAT automatically sets up port forwarding (router must support/allow uPnP)
- HDMI/VGA and CVBS monitor outputs for up to 1080p HD display detail; use either for main or spot/call functions
- User friendly GUI with graphical icons, visual indicators and multiple language support
- Easy to use on-screen menus include digital zoom and instant playback of recent video
- Operate using front panel controls, wheel mouse or included IR remote
- Quickly locate and review event video
- Search by date/time, or preview images by pointing along a color coded timeline of record type
- Tag video of interest for easy retrieval or export
- Play based on results of extensive event/alarm log search
- Use “Smart Search” to define an area of interest; the DVR quickly reviews recorded video to list instances of motion in that area for review by the operator
- Digital Zoom with Virtual PTZ in Live & Playback
- Privacy masking (4 zones) to block observation of specific areas within the field of view
- Audio Inputs (5) and Outputs (2) for recording and/or two way audio
- Alarm inputs (16) and outputs (4) to interface with local hardware
- Ethernet interface for remote network viewing and control, and to connect IP cameras
- Multiple Control Inputs: local mouse/hand held IR remote controller (both included); web browser and CMS controls
- On-screen PTZ control via mouse or IR remote
- USB 2.0 ports on front and one on rear panel for video archive and mouse usage
- Free DDNS Service – static IP address is not required for reliable remote access
- IE, Chrome, Firefox and Safari browser Web clients
- Free Multi-Site Windows and MAC OMNI CMS can display up to 64 live/16 playback views
- Remote configuration support from built-in web interface and/or free OMNI CMS program
- Free iOS and Android apps:
- Scroll though single/quad display live views
- Playback specific cameras by date/time plus easy slider control
- Audio monitoring support
- PTZ and relay control
- Up to 16 camera views from HD tablets (HD app)
Downloads
|
Model
|
EZHD-TRF4
|
EZHD-TRF8
|
EZHD-TRF16
|
|
Intelligent Video Inputs
|
Analog EZHD/SD Inputs
|
4
|
8
|
16
|
|
HD Video Resolutions
|
EZHD / HD-TVI 720p30(25), 720p60(50), 1080p30(25)
|
|
Analog CVBS Video Input
|
Up to 960x480,720x480(NTSC); 960x576,720x576(PAL)
|
|
Adaptive Ports
|
Input Format Auto Detection, EZHD/SD can be mixed in any combination, at any time
|
|
Interface
|
BNC Connector; 1V p-p, 75Ω
|
|
Privacy masking
|
4 areas programmable in OSD menu
|
|
Additional OMNI-IP PNP Channels (up to 2 MP)
|
2
|
|
Total Cameras Supported
|
6
|
10
|
18
|
|
Video Output
|
Main HDMI & VGA
|
Full HD 1920×1080/60Hz; SXGA: 1280×1024/60Hz; 720P: 1280×720/60Hz; XGA: 1024×768/60Hz
|
|
CVBS Analog BNC
|
NTSC 704x480 / PAL 704x576; 1V p-p, 75Ω
|
|
Display Modes
|
1, 2x2, 1+5, 1+7, 3x3, 4x4 split; User Defined Sequence / Alarm Pop-up HDMI/VGA and/or CVBS may be configured as main or call/event monitor
|
|
Recording
|
Video Compression
|
Dual Stream: H.264 for Main Stream and Sub-stream
|
|
Video Bitrate
|
32Kb/s~10Mb/s each channel
|
|
Encoding
|
Main Stream
|
1080p; 720p; WD1; 4CIF; VGA; CIF
|
|
Sub Stream
|
WD1, 4CIF; CIF; QVGA; QCIF
|
|
Frame Rate
|
Main Stream
|
1/16 fps ~ Real time frame rate
|
|
Sub Stream
|
1/16 fps ~ Real time frame rate
|
|
Quality
|
6 levels: Lowest/Lower/Low/Medium/Higher/Highest
|
|
Mode
|
Continuous; Motion; Alarm; Motion or alarm, Motion + Alarm
|
|
Motion Detection
|
Configurable per camera for area(s), sensitivity and arming schedule programmable by day of week and hour of day
|
|
Schedule Period
|
Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
|
|
Pre- and Post- Event Recording
|
Pre-record 0~30 seconds; post record 5s~10 minutes
|
|
Playback
|
Synchronous Playback
|
4 channels
|
8 channels
|
16 channels
|
|
Playback Resolution
|
1080p, 720p, WD1, 4CIF, VGA, CIF, QVGA, QCIF
|
|
Search Type
|
Time/Date; motion or log event; Manual Tags; Smart Search for motion events from recorded video
|
|
Capacity
|
Up to record rate
|
|
Playback Controls
|
Play; Pause; Forward/Reverse; speed control for single~1.8~16X; jog/shuttle Slide bar with overview of record type and snapshot display from slider position
|
|
Digital Zoom During Playback
|
Supported on Local Displays and CMS
|
|
Event & Alarm
|
Event Source
|
MD (Motion Detection), Video Loss, Video Tampering/Exceptions
|
|
Event Action Schedule
|
Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
|
|
Event Action
|
Buzzer, E-mail, Alarm Full Screen Pop-up, Notify CMS Client, trigger alarm output
|
|
MD Area
|
User selectable grid pattern 22x15 areas with adjustable per camera sensitivity
|
|
|
|
System Alarm
|
Alarm Source
|
HDD Error, HDD Full, LAN Fail/Address Conflict, Illegal login, Video Signal Exception/, Record/Capture exception
|
|
Alarm Action
|
Buzzer, E-mail, Notify CMS Client (network permitting), trigger alarm output
|
|
|
Two-way audio
|
Audio input pass through to remote web or CMS client; remote audio from web or CMS client pass through to audio output
|
|
Audio
|
Input
|
4 Inputs for record, 1 input for two way audio; RCA, 2V p-p, 1KΩ
|
|
Output
|
2 Outputs; RCA, 2V p-p, 1KΩ
|
|
Compression
|
Up to 64Kbps, G.711u
|
|
Network
|
Interface
|
1Gb/s 1000 Base-T Ethernet RJ-45
|
|
Addressing
|
Static IP, DHCP, xDSL support
|
|
NTP/DST
|
Supported; choice of time zone, NTP server, DST start/end/offset
|
|
Protocols Supported
|
TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS, KT&C Plug-and-Play (for connected IP Cameras), OMNI Utility Device Discovery
|
|
NAT
|
uPnP router NAT/port mapping forwards ports automatically (*Router must support/permit uPnP function)
|
|
Users
|
Up to 128 simultaneous connected users
|
|
DDNS
|
Simple DDNS free service tracks WAN IP address and HTTP port
|
|
Security
|
User IDs
|
“Admin”, plus multiple configurable login IDs
|
|
User Levels
|
All rights for “admin”; Per camera per user rights assignment for Operator and User levels
|
|
User Privilege Control
|
Local and remote access to Live views, audio, recording, playback, menus, PTZ, alarms, copy, logs, upgrade, reboot
|
|
Storage & Clip copy
|
HDD Storage
|
4 SATA HDD up to 4Tb each
|
|
eSATA
|
One, on rear panel
|
|
NAS/SAN
|
up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
|
|
Copy Type
|
Multi-Channel or Single Channel File
|
|
Copy Device
|
USB 2.0 Drive (2 ports)
|
|
S.M.A.R.T.
|
Temperature, duration, error rates, bad sector detection, and more
|
|
|
USB 2.0 Ports
|
Two front, one rear for mouse and data I/O
|
|
Serial & I/O
|
Serial Port
|
1 RS-232C (future use)
|
|
RS-485
|
One; selectable speed and bit pattern; multiple protocols (Pelco P, Pelco D, others)
|
|
Inputs
|
16 alarm inputs
|
|
Outputs
|
4 alarm outputs
|
|
Keyboard
|
Input for external control keyboard
|
|
Up the Cable Control
|
Multiple protocols, can be sent out of any BNC port to compatible cameras
|
|
User Controls
|
Local Controls
|
Front Panel camera, function and navigation buttons; IR Remote; Mouse
|
|
Software
|
Web Viewer
|
Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
|
|
User Rights Control
|
Per user-per camera for multiple functions
|
|
Mobile Viewer
|
iOS and Android supported ; live 1 & 4 camera views; single camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, displays up to 16 live view cameras
|
|
CMS
|
Free PC and MAC Clients support multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
|
|
Event Logging
|
Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
|
|
Firmware Upgrade
|
From USB or remotely
|
|
Backup/Restore Configuration
|
From USB or remotely
|
|
|
Dimension (W x H x D)
|
17.5” x 15.3” x 2.7” | 445 × 390 × 70mm
|
|
General
|
Chassis Type
|
19” rack-mountable 1.5U chassis
|
|
Weight without HDDs
|
11 lb. / 5Kg
|
|
Operating Temp
|
14°F~131°F (-10°C~55°C)
|
|
Operating Humidity
|
10% ~ 90%
|
|
Voltage
|
100~240 VAC 47~63Hz
|
|
Power
|
Up to 30W
|
Up to 40W
|
Up to 55W
|
|
Certifications
|
FCC, CE, RoHS
|
|
|
|
 |
|
 |
|
|
|
